The plastic turnover box makes the distribution as a breakthrough in the modern logistics and material system reform, and has achieved faster development in China. The earliest foreign picking of raw fuel blending technology was a plastic turnover box factory in the United Kingdom. At that time, only iron ore was mixed to achieve effect, and it gradually became popular in Western European countries. The special industrial combustion and mixing technology is applied in industries such as coal and electric power, and is mixed with inferior raw fuel to promote the development of energy-saving technology for plastic turnover boxes. Plastic crates are made from high density polyethylene or copolymerized polypropylene. The polyethylene turnover box can withstand temperatures down to -40 ° C and can be used in the refrigeration industry.
The polypropylene turnover box can withstand temperatures up to 110 ° C and can be used in applications where cooking and disinfection are required. The polypropylene turnover box has many advantages over the polypropylene turnover box, such as good washing performance, good resilience under high compression load, and about 6% lighter than the polyethylene container of the same size. The anti-sliding of the plastic turnover box refers to a short edge of the bottom turnover box of the stacking 2m, which is at a 5 degree angle with the ground to see if there is slippery or collapsed phenomenon. The test mainly investigates the small anti-sliding ability of the plastic turnover box in the stacking state. The anti-sliding performance of the plastic turnover box is mainly related to the ratio of the length to the height of the tote and the size of the mating part. The turnover box with poor anti-sliding performance is likely to cause the box to slip off and the product to be damaged due to the falling.
Previous: No Information